4-39
4.4.6 Deleting Waypoints
· Waypoints registered between 1 and 10000 can be deleted.
· Waypoints on routes which are currently being executed cannot be deleted.
· When a waypoint on a route which is not currently being performed is deleted, it will be deleted
from the route as well.
1. Press
, , and then , and the "DELETE WPT/ROUTE" Screen will be
displayed.
2. Press
"WPT DEL".
The following is an overview of the delete waypoint submenu.
(1) ALL: Delete all waypoints from 1 to 10000.
(2) WPT LIST: Specify the range to be deleted on the waypoint list.
(3) WPT NO.: Specify the waypoint number to be deleted with the numeric keypad.
(4) FROMTO: Enter the start and end points of the range to be deleted with the
numeric keypad.
3. Press to select the waypoint to be deleted, and then press
.
(1) When "FROM TO" is Selected
Enter the start point and end point with the numeric keypad, and press
.
(2) When "WPT LIST" is Selected
The waypoint list will be displayed. Move the cursor to the start and end points, and press
to select the range.
Please refer to "4.8.3 Selecting a Range within a List" for more details.
(3) When "WPT No." is Selected
Enter the waypoint number with the numeric keypad, and press
.
4. The following will be displayed. Press to select "YES", and press
.
Procedure
Deletion Range Start
Deletion Range End
Deletion Quantity
To Next Page
Loading...
