4-45
Ex 2) Adding a waypoint at the start
Ex 3) Adding a waypoint at the end
4. Move the cursor to the waypoint number you wish to register, and press
.
Refer to "4.8.1 Moving the Cursor within a List" for details regarding cursor movement.
5. The waypoint information screen will be displayed. Select the item number you wish to enter
with the numeric keypad, and enter the waypoint information.
Please refer to "4.5.1 Displaying the Route List" for details.
Select "7. DETAIL" to set the "TURN RATE","TURN RADIUS, or "TIME ZONE". This is only
used for routes shared with ECDIS.
6. Press
"ENTRY".
7. When you have completed waypoint addition, press
, , or to exit the
route information screen.
Move cursor to first waypoint
Move cursor to after last waypoint
Waypoint List
Waypoint List
To Next Page
Loading...
