4-52
Route Reception
Route switching occurs automatically.
(3) SHARE 3 Active Route Sharing
Route Start / Output
1. Start the route as directed in "4.6 Performing Navigation".
LAN route output starts automatically.
Route Reception
When an active route is received, the following is displayed.
Select "YES" to switch the active route.
Select "NO" to not switch the active route. If the active route is not switched, the unit will
not switch routes and will stop sharing route navigation.
(4) SHARE 4 Active Route Sharing
Route Start / Output
1. Start the route as directed in "4.6 Performing Navigation".
2. When the route is started, the following will be displayed.
Select "YES" to output the active route externally.
Select "NO" to not output the active route externally. If no external output is performed,
the active route is performed only on the local unit.
Route Reception
When an active route is received, the following is displayed.
Select "YES" to switch the active route.
Select "NO" to not switch the active route. If the active route is not switched, the unit will
not switch routes and will stop sharing route navigation.
To Next Page
Loading...
