4-53
4.5.7 Setting Route Default Settings
· The route default value is applied to routes created via GOTO.
· The following is an overview of the route default settings submenu.
(1) WIDTH PORT: The port route width can be set.
(2) WIDTH STBD: The starboard route width can be set.
(3) ARRIVAL RAD: The arrival circle radius can be set.
(4) SPEED: The planned speed can be set.
(5) SAIL GC/RL: GC or RL can be selected as the sail calculation method.
(6) SOG SMOOTHING: Smoothing can be applied to ship speed when calculating expected
arrival time and expected time required.
Up to 99 seconds of smoothing can be set. When the estimated arrival
time has a large degree of variance, use a large smoothing value.
1. Press
, , and then to display the route default setting screen.
2. Select the number of the item you wish to set.
3. Select "SET" with and press .
If you do not wish to set an item, select "OFF" and press
.
4. Enter values with the numeric keypad, and press
.
Procedure
To Next Page
Loading...
