Need help?Do you have a question about the JSR Ultrasonics DPR300 and is the answer not in the manual?
General| Brand | JSR Ultrasonics |
|---|---|
| Model | DPR300 |
| Category | Receiver |
| Language | English |
Details about the type and rating of fuses used in the DPR300.
User safety precautions and warnings related to the DPR300 unit.
Information on how to contact JSR Ultrasonics technical support for assistance.
Instructions regarding the cleaning requirements for the DPR300.
Details the limited warranty terms and conditions for the DPR300 instrument.
Outlines the limited warranty coverage for the instrument control software.
Disclaimer regarding the intended use of the product and liability for misuse.
Provides a general overview of the DPR300 ultrasonic pulser/receiver and its configurations.
Describes the physical dimensions and enclosure of the DPR300 unit.
Explains the various functional blocks and components of the DPR300 system.
Describes the manual controls, logic, and RS-232 interface for DPR300 operation.
Details the high-voltage power supply that powers the pulser in the DPR300.
Explains the pulser's function, including impedance, energy, and damping controls.
Description of the push button switch for powering the DPR300 on/off.
Details the amber LED indicating power status on the DPR300.
Describes the red LED that indicates when the DPR300 pulser is active.
Rotary switch for setting the pulse repetition frequency (PRF) in internal trigger mode.
Lists the essential system components included with the DPR300 shipment.
Guidance on positioning the DPR300 for easy disconnection from the mains power.
Information on how the instrument is connected to earth ground.
Specifies the computer requirements for utilizing the DPR300's remote control option.
Explains how to operate the DPR300 in pulse-echo mode using a single transducer.
Describes the setup for transmission mode operation using separate transducers.
Provides a typical sequence of steps for operating the DPR300 unit.
Introduces the different configurations and communication methods for remote PC control.
Describes the features and capabilities of the JSR Control Panel software.
Details the JSR Common SDK for developing custom application programs.
Explains the JSR Simple ActiveX object for easier interface with DLL functionality.
Specifies the pulse type generated by the DPR300 pulser.
Details the voltage ranges and selections for the pulser's high voltage supply.
Specifies the typical fall time for the pulser's initial transition.
Describes how pulse amplitude is determined by various control settings.
Describes the receiver gain control and its range.
Specifies the phase characteristic of the receiver.
States the input impedance of the receiver.
Lists the available bandwidth options for the receiver.
Describes the interface requirements for connecting to a control computer.
Specifies the operating temperature range for the DPR300.
Specifies the operating humidity range for the DPR300.
Lists the supported AC input voltages for the DPR300.
Specifies the power consumption of the DPR300.
Provides the physical dimensions of the DPR300 unit.
States the weight of the DPR300 unit.
To Next Page
