Deep Fat Fryer
Disconnect the Mains Plug
from the
socket and allow the oil and fyer to cool
completely before you move or store this
appliance.
Filters
3. With the Lid
closed, release the Filter
Cover by gently lifting the spring tab.
4. Remove the Filter Cover
then the Black
and White filters .
5. Wash the Filter Cover
and the Filters
& in warm soapy water.
6. Allow to dry completely before replacing
(in this order) the White Filter
, the
Black Filter and the Filter Cover .
• The Black and White filters should
be replaced if it has become odorous or
excessively greasy. Please contact Judge
Customer Services.
Basket
1. Raise the Basket Handle
to the lift
position. Take out the Basket .
2. Wash and thoroughly dry the Basket
taking care not to allow water to enter
the Basket Handle .
Fryer exterior
• Clean the surface of the fryer using a
damp cloth with a little detergent.
Removing oil for storage or disposal
1. Disconnect the Mains Plug
from the
socket and allow the oil and fyer to cool
completely before removing the oil.
2. Remove the Lid
. With the Lid open
gently pull it upwards and toward you to
release.
3. Pour the oil into a suitable storage or
disposal container.
The Lid
can be washed in hot soapy water.
Ensure it is thoroughly dry before replacing
on the fryer, taking care to slot the Lid Spring
Mechanism into the rear of the fryer.
• The oil needs to be changed regularly.
• When frying food containing no fat, the
oil may be changed after 10-12 uses.
• When frying food containing fat, the oil
should be changed after 3-5 uses.
• Do not use the oil for more than 6
months. Read the instructions on the oil
container.
• The oil must be changed if it becomes
very foamy, odorous, blackens or turns
sticky.
• When storing, do not mix different types
of oil.
• Dispose of old oil in an environmentally
friendly way, in accordance with local
regulations.
• For extended periods without use, the
unspoilt oil should be transferred to a
sealed container and stored in a cool
place or refrigerator.
Cleaning & Storage