Need help?Do you have a question about the JUGS Sports SP3 and is the answer not in the manual?
General| Brand | JUGS Sports |
|---|---|
| Model | SP3 |
| Category | Sports & Outdoors |
| Sport Type | Baseball, Softball |
| Usage | Pitching Machine |
| Age Group | All Ages |
| Power Source | Electric |
| Material | Steel |
| Color | Black |
Symbols (Danger, Warning, Caution) indicate hazards and prevent injury.
Labels draw attention to dangers; understanding them is crucial for safety.
Operators must be 18+, instructed. Obey all warnings to prevent injury.
Read manual, guard against shock, keep area clear, supervise children.
Product must be grounded for safety. Use proper grounding plug and outlet.
Use 3-wire, 16 AWG or larger cords. Ensure they are heavy-duty and for outdoor use.
Machine uses 110V AC. Do not use DC or adapters. Ensure proper outlet.
Identifies key parts of the pitching machine with labels and a diagram.
Assemble parts before connecting power. Inspect for damage or missing items.
Insert pinned ends of legs into base until pins are fully engaged.
Position legs correctly, check speed dial, position antenna, connect cord, use screen.
Lock machine, lean forward, lower to ground, lift legs and roll like a wheelbarrow.
Wear safety gear, check speed dial, plug in, position machine, select pitch, and throw test balls.
Use vertical and horizontal knobs to adjust pitch path. Test balls are needed.
Control speed/elevation, space pitches, show ball, avoid unattended operation, use protective screen.
Check bolts/nuts, turn speed dial to minimum when stopped.
Hold ball consistently, ensure batter is ready, feed smoothly, adjust spacing for batter readiness.
Use specific JUGS balls only. Do not mix ball types. Wear safety gear.
Explanation of the SPEED, SELECT-A-PITCH™ dials and controls.
How to select and set up various pitches (Fastball, Curve, Slider, etc.).
Experiment with settings, test pitches, adjust speed/elevation, check bolts, turn speed to minimum.
Ensure fielder is ready, feed ball smoothly, adjust spacing for fielder readiness.
Rotate top upward for fly balls. Aim with horizontal lever. Feed ball correctly.
Adjust vertical levers. Remove horizontal lever for 360-degree aim.
Aim machine vertically. Rotate for desired position. Feed ball correctly.
Maintain 24 psi tire pressure. Clean tires with sandpaper for performance.
Details motor, tire, and frame specs, including speed, weight, and recommended generator.
5-year on parts, 2-year on control panel. Outlines terms and conditions.
To Next Page