#1. Normal Charge Setting
Use this setting to charge the battery normally. This is the default
charge setting used to fill the battery to approximately 97-100%
capacity.
#2. Partial Charge Setting
Use this setting to extend the lifespan of the battery pack. The
charger will charge the battery to approximately 80% capacity with
a reduce charging speed.
Charging to 80% can extend the life cycle of the pack by up to 2x.
The disadvantage is roughly 20% reduced riding range. Studies
have shown that charging to 80% gives the best overall lifespan without sacrificing too much of
the pack's range.
#3. Slow Charge Setting
The charge current will be reduced by half. Use this setting when
you want to reduced the power demands on the electric outlet, for
example when charging with a solar power system. A slower charge
setting can also slightly increase the lifespan of the battery.
#4. Fast Charge Setting
Use this setting when you need to charge at maximum speed. It is
useful when you need to get the charge back into the battery as
quickly as possible such as in a delivery/rental fleet situation or on
long e-bike road trips.
#5. Storage Charge Setting
Use this setting when you need to store the battery for long periods
of time. It is recommended to charge the battery at least once every
3 months to maintain the health of the battery. The charger will
charge to approximately 50% capacity -the ideal level for storing the
battery pack.
Another option for storing the pack is to leave the charger connected to the battery and the
electric outlet as the charger will automatically trickle charge the battery to maintain
approximately 50% charge level.
To Next Page
Loading...