– 34 –
(13) Replacement and adjustent of upper feed roller
1. Replacement of upper feed roller
Each version is provided with the standard upper feed roller
.
The replacing parts for the upper feed roller
come in six types. According to the sewing materials, use
these parts replacing the upper feed roller .
(Caution) In the case of replacement of the roller from narrow width to wide width, and vice versa, both
the throat plate and the feed dog should also be replaced.
(Rear direction)
Screw contact face
Key groove
(Front direction)
Feed roller support arm (left)
No. Name US Part No. JUKI Part No.
1 Standard type narrow roller 35875AV 30539100
2 Inverted type narrow roller 35875AW 30555106
3 Narrow rubber roller 35826EF 30327100
4 Standard type wide roller 35826X 30515704
5 Inverted type wide roller 35826CB 30553804
6Wide rubber roller 35826DZ 40059568
Upper feed roller name and US part No., JUKI part No.
(Left direction)
(Right direction)
Feed roller support arm (right)
Screw contact face
Standard Adjustment
To Next Page
Loading...
