3.3
R€moving
the
fixars
The
carriage
is fixed with
two buffers which
protect
the carriage from shocks
or
vibration
during
transportation.
Keep
these cariage
fixers for
possible
reshipment in the future.
Step l: Hold the
printer
cover as shown below and lift it.
Step 2:
When the
cover
lock on
your
side has b€en disengaged,
draw
off
the cover
towards
you.
Step 3: Remove the right carriage fixer.
Step 4: Move the carriage to the riglt and remove the left
carriage
fixer. AC
corC
and ribbon can be taken out.
The
daisy motor is fixed not to slip out
during transportation.
Step Ir
Cht the
motor
band and rcmove it ftom
the carriage.
Step 2: Remove the lever fixer from
lhe carriaBe.
The
platen
is fixed with two materials
which
protect
the
platen
from
shocks or
vibration
dudng tmnsportation-
Step l: Remove the
platen
fixer from both
side of the
platen-
-4-
To Next Page
