− 101 −
5. TILTING THE MACHINE
1
Remove sewing tables
1
and
2
.
Pin hole, front
1
2
Pin, rear
Plate spring
2
Turn the binder unit.
Lift binder
3
in the direction A, support section
B by hand and turn the whole binder in the
direction C.
Binder is locked with ball plunger. Turn
it rather strongly in the direction of C to
release the lock.
3
Release machine xing hinge.
Pressing section
A
, release machine xing
hinge
4
, and remove hinge hook
5
.
C
A
B
3
5
4
A
CAUTION
:
• Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
•
When tilting/raising the machine, be careful not to allow your hands, ngers or any other part of
your body to be caught in the related parts.
To Next Page
Loading...
