− 87 −
5
Clear the counted value
When clearing the counted value, set the count to the stop state
and press CLEAR button
F
.
＊
CLEAR button is displayed only in case of stop state.
When CLEAR button
F
is pressed, the clear conrmation
screen is displayed.
When CLEAR button
G
is pressed in the clear conrmation
screen, the counted value is cleared.
3
Start the measurement
Press
START button
C
, and the measurement of each data
is started.
4
Stop the count
Display
the operation measurement screen referring to Items
1
and
2
of
“
^
-15-(5) Observing the operation measurement in-
formation” p.86
.
W
hen the measurement is being performed, STOP button
D
is displayed. When STOP button
D
is
pressed, the
measurement is stopped.
C
is displayed at the position of
STOP button. In case of continuing the measurement, press again
START button
C
.
The measured value is not cleared until
CLEAR button
E
is pressed.
G
F
D
E
C
To Next Page
Loading...
