JUKI DDL-555-4 - Stitch Length Setting

12. Stitch length adjustment
Stitch length
E
Stitch length is adjusted by the stitch dial
located above the reverse feed control lever.
Set a desired stitch length (mm) of the dial to
the pointer pin fi.xcd to the machine arm.
*The ma.ximum stitch length is 4 mm (5/32").
13. Reverse stitching by using the reverse feed control lever
N
I
Feed control lever
/
OOL-SBS-4
Push down the reverse feed control lever as long
as a desired reverse stitch is completed.
Release your hand from the lever, and it will
immediately go up to feed the material in the
forward direction.
19 -
From the library of: Superior Sewing Machine & Supply LLC