JUKI DDL-8700-7 - Production Support Data Management; Detailed Production Volume Settings

- 11 -
Table 2: Mode resetting operation
Mode name
Switch
6
(held pressed for 2 seconds)
Switch
6
(held pressed for 4 seconds)
Target No. of pcs. display mode
(F100)
Resets the actual number of pieces.
Resets the difference between target
number of pieces and actual number
of pieces.
-
T
arget/actual No. of pcs. difference
display mode
[F200]
Resets the actual number of p
ieces.
Resets the difference between target
number of pieces and actual number
of pieces.
-
Sewing machine availability rate
display mode
(F300)
R
esets average availability rate of
sewing machine
Resets average availability rate of
sewing machine.
Resets average pitch time.
R e s e t s a v e r a g e n u m b e r o f
revolutions of sewing machine.
Pitch time display mode
(F400)
Resets average p
itch time
Resets average availability rate of
sewing machine.
Resets average pitch time.
R e s e t s a v e r a g e n u m b e r o f
revolutions of sewing machine.
Average numb er of revolutions
display mode
(F500)
R e s e t s a v e r a g e n u m b e r o f
revolut
ions of sewing machine
Resets average availability rate of
sewing machine.
Resets average pitch time.
R e s e t s a v e r a g e n u m b e r o f
revolutions of sewing machine.
< Detailed setting of production volume manage-
ment function (F101, F102) >
• When switch
1
is held pressed (for three sec-
onds) under the target No. of pcs. d
isplay mode
(F100) or the target/actual No. of pcs. difference
display mode (F200), the detailed setting of the
production volume management function can be
carried out.
• The setting state of the number of times of
thread trimming (F101) and that of the target
achievement buzzer (F102) can be changed
over by pressing switch
2
.
• The number of times of thread trimming for sew-
ing one piece of garment can be set by pressing
switch
3
in the setting state of the number of
times of thread trimming (F101).
• It is possible to set whether the buzzer sounds
or not when the actual number of pieces has
reached the target volume by pressing switch
3
in the setting state of the target achievement
buzzer.
3
1
2