– 100 –
8-7-2. Communication function
①
Selecting the communication function
1. Press
❾
on the sewing screen
to display the mode screen.
2. Select "09 Communication" by press-
ing
❶
. Then, press
❺
to display the communication data/
direction selection screen.
<Mode screen>
❺
②
Selecting the communication data and communication direction
1. Select the communication data
A
by
pressing
❶
. (Refer to
"8-7-
2.(2) List of communication data for-
mats" p.101
.)
2. Select the communication data
B
by
pressing
❷
.
: Data stored on the operation
panel is written to the USB
thumb drive.
: Data stored on the USB thumb
drive is written to the operation
panel.
3. Press
❺
Data stored on the USB
thumb drive is written to the operation
panel.
❶
❾
❶
❷
(1) How to use the communication function
❺
A
B
Data can be input/output by means of a USB thumb drive.
<Communication data/communication direction selection screen>
To Next Page
Loading...
