– 109 –
8-9-2. NFC
The operation panel supports NFC (Near Field Communication).
Sewing data, maintenance information or the like can be viewed, edited, copied, etc., on an Android
terminal (such as tablet and smartphone) on which JUKI application for Android [JUKI Smart App] has
been installed, by means of the NFC communication function.
Refer to the Instruction Manual for JUKI Smart App for details of JUKI application for Android [JUKI
Smart App].
①
Position of the NFC antenna
1. Position of the NFC antenna
In the case of carrying out the NFC
communication between the sewing
machine and a tablet or smartphone,
bring the antenna of the tablet or
smartphone near to NFC mark
❶
as
shown in Fig. 2.
* If the NFC communication has failed,
error message will be displayed on the
tablet/smartphone screen.
When the error message is displayed
on the screen, carry out the NFC com-
munication again.
❶
②
Precautions to be taken when handling NFC
• The position of the NFC antenna varies according to the tablet/smartphone used.
Be sure to read the instruction manual of your device before using the NFC communication function.
• To use the NFC communication function, place the NFC communication function setting in "Enable"
while referring to the instruction manual for your tablet/smartphone.
<Fig.2>
<Fig.1>
To Previous Page
Loading...
