4-2-6. Teaching function
This is the function that enables entry of the number of stitches of a sewing pattern using the actual
number of stitches sewn.
This function screen can be displayed from the sewing pattern edit screen.
* The teaching function can be used in the case the "constant-dimension sewing" or "polygonal-shape
stitching" is selected.
<Sewing screen (constant-
dimension sewing)>
<Sewing screen (polygonal-shape
stitching)>
The sewing pattern edit screen is
displayed by pressing
❺
on
the sewing screen.
①
Displaying the teaching screen
When S002 Stitch number setting func-
tion is selected on the sewing pattern
edit screen, press
❺
to display the
teaching screen.
②
Starting teaching
Pictograph
A
is displayed on the screen
to show that the operation panel is placed
in the teaching mode.
<Number of stitches entry screen>
(1) How to set (constant-dimension sewing)
A
After the completion of sewing of the sew-
ing pattern (the last stitch), depress the
back part of the pedal.
<Teaching screen>
❺
❺
– 38 –
To Next Page
Loading...
