JUKI DDL-9000C-S - 4-7. Memory switch data

4-3-3. How to set the counter
①
Selecting the counter setting
1. Display the mode screen by pressing
❾
.
2. Select the "02 Counter setting" with
❶
, and press
❺
.
<Mode screen>
<Counter setting screen>
1. Select the type of counter for setting
with
❶
.
2. Press
❺
to conrm the selection.
②
Setting the type of counter, current value of counter and preset value for counter
The counter setting screen is displayed to
enable setting of data on the counter.
・
Every time
❶
is pressed, the
screen display that is shown in reverse
video changes in the order of "Type
of counter", "Current value of counter"
and "Preset value for counter" to en-
able setting of data on the item shown
in reverse video.
<Counter type selection screen>
Type of counter
Current value of
counter
Preset value for counter
❶ ❷
❶
❶
❺
❺
❽
❾
・
Change the type of counter or the value of counter with
❷
when the relevant item is shown
in reverse video.
* If
❽
is pressed in the case the sewing counter is selected, the current value of the sewing
counter will be changed to 0 (zero). In the case the bobbin thread counter is selected, the current
value of the bobbin thread counter is made to be equal to the preset value by pressing
❽
.
– 44 –