JUKI DDL-9000C-S - 8. HOW TO USE THE OPERATION PANEL (APPLICATION)

– 63 –
6. CARE
Perform the maintenance below every day for longer use of your machine.
Use this mode for the maintenance of the sewing machine such as adjustment of the hook timing and re-
placement of the gauge.
6-1. Maintenance mode
Be sure to check that the
screen has changed to the
maintenance mode screen so
as to prevent accidents caused
by abrupt start of the sewing
machine.
While the sewing machine is placed in the maintenance mode, it will not start even if the pedal
is depressed.
1) Display the mode screen by pressing
❾.
2) The screen is changed over to the main-
tenance mode screen.
❾
Conrm that the top of oil amount indicating rod ❶
is between the upper engraved marker line A and
the lower engraved marker line B of the oil amount
indicating window. (For the details, refer to "2-14.
Lubrication" p. 12.)
6-2. Conrmation of the amount of oil in the hook oil tank
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❶
A
B