MOL-254 (September, 2003) 2/2
Part No.
G5412-254-000
B1818-210-D0B
B1817-210-DAC
138-82501
138-81255
138-81008
HL-0084230-00
Description
Upper knife (loop cut knife)
Shuttle, H type
Shuttle race ring complete, C type
Needle hole guide
Moving knife junction
Lower plate blank
EP-ROM for data
Remarks
Exclusive to MOL-254
Also used with the AMS-210D
Also used with the AMS-210D
Also used with the MOL-154
Also used with the MOL-154
Also used with the MOL-154
Also used with the LK-1900
Part No.
G5700-254-0A0
G5730-254-0A0
G5760-254-0A0
G5770-254-0A0
G5780-254-0A0
Description
Belt-loop tension releasing (fullness)
Belt-loop feeding device
(belt-loop slackener)
Air gun assembly
Needle cooler
Needle thread breakage detector
Feature
The device slackens the belt-loop when attaching it on the garment body.
The cylinder type belt-loop feeding device supports the belt-loop feeding of the
main unit.
―
The device cools the frictional heat generated by the needle during sewing.
The device detects breakages in the needle thread by means of a thread take-up
spring. If a needle thread breakage is detected, the device halts the sewing of
the next loop.
MAJOR SPARE PARTS
WHEN YOU PLACE ORDERS
FINISHED BELT-LOOP STITCH SIZE
OPTIONS
MOL254
Power supply
Single-/3-phase
200〜240V
220〜400V
220〜400V (For CE)
Code
D
L
M
Code
Z
A
B
C
D
E
Option
No options
Belt-loop tension releasing device (fullness)
Belt-loop feeding device
Air gun
Needle cooler
Needle thread breakage detector
＊Enter codes of required options in alphabetical order.
● The applicable loop width for the cross-cutting device is increased. In this model, both the cross-cutting device and the
straight-cutting device can now cut loop up to 20mm width.
＊The machine is factory-equipped with cross-cutting device at the time of delivery.
Cross cutting (standard) Straight cutting
15〜19mm (19/32"〜3/4")(depending on the loop width)
40〜70mm (1-37/64"〜2-3/4")
48〜78mm (1-57/64"〜3-5/64")
40〜70mm (1-37/64"〜2-3/4")
48〜78mm (1-57/64"〜3-5/64")
11mm
(7/16")
4mm
(5/32")
9〜20mm
(23/64"〜25/32")
9〜20mm
(23/64"〜25/32")
11mm
(7/16")
4mm
(5/32")
To Next Page
Loading...
