ASN-697, ASN-695 (September, 2003) 2/2
SPECIFICATIONS
OPTIONS
FUNCTION COMPARISON TABLE DIMENSIONS (mm)
＊Please refer to FUNCTION COMPARISON TABLE.
Description Part No.
Model name
Feature
ASN-697 ASN-695
Single stacker/SS40 ― Optional Optional
Double stacker/SS42 ― Optional Optional
Silencer for chain-off thread
suction device
GMC08042000 Optional Optional
Table air blower G55403950A0 Provided as standard Optional
Cloth receiving board 40013687 Provided as standard Optional
Cloth control device 40013694 Provided as standard Optional
Cloth feeding device G59253970A0 Optional Optional
Differential feed device 40013697 Provided as standard Optional
Auxiliary table G54203970A0 Optional Optional
Differential feed pedal
(for ASN-697)
G54273970A0 Optional ―
Stacker pedal G54253970A0 Optional Optional
2-pedal unit (for ASN-697) G54223970A0 Optional ―
The max. number of garments that can be stacked is 40
(without pedal)
The max. number of garments that can be stacked is 140
(without pedal)
For reducing the air suction noise of the chain-off thread
suction unit
Air blower blows air to help facilitate the smooth feed of the
material during sewing.
The table for retaining materials before they are sewn.
(1200mm (L)×350mm (W))
With this optional device, the machine is able to sew, at a
minimum, curved sections with R40mm.
The device feeds short materials to a position where they can
be stacked.
With this device, the machine automatically shirr desired
sections of the material by programming data.
The part facilitates handling of long-size materials such as
slacks and white overalls.
With this part, the operator is able to manually shirr desired
sections of the material.
The part is used to start/stop the machine and open/close the
cloth retaining bar.
Stacker pedal ＋Differential feed pedal
＊2-needle overlock type model is available for order. Please contact JUKI distributors or agents in your area for more information.
Model name ASN-697 ASN-695
Machine head Exclusive for MO-6904S
＊
Max. sewing speed 8,000rpm
Stitch length 0.8〜4.0mm
Lift of the presser foot Max. 7mm
Overedging width (mm) 4.0, 4.8, 5.6
Needle
(at the time of delivery) DC×27 #11 (#9〜#14)
Chain-off thread trimmer T038 (suction type side cutter)
Sewing specifications
Cutting curve: 200R or more (40R more when cloth control device is used)
Cloth size: Width 400mm or less, Length 480mm or more (length for which stacking is possible)
Number of cloth: Limited to 1
Class of work Men's slacks, one-piece, skirt, pants, coat etc.
Power supply Single-phase/3-phase
Power consumption 700W
Compressed air and 0.5Mpa (5kgf/F), 220NR/min. 0.5Mpa (5kgf/F), 170NR/min.
air consumption (when the stacker is used: 250NR/min.) (when the stacker is used: 200NR/min.)
Lubrication Automatic
Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
Total weight
190kg 180kg
(when all the optional devices are installed: 215kg) (when all the optional devices are installed: 210kg)
Function, device ASN-697 ASN-695
Specifies a sewing speed
Touch panel Touch panel
(provided as standard) (provided as standard)
Speed control function
Can be set at either
Manual
“automatic” or “manual”
Cloth control device Provided as standard Optional
Cloth feeding device Optional Optional
Table air blower Provided as standard Optional
Cloth receiving board Provided as standard Optional
Partial shirring function Provided as standard Optional
Curve detecting function
(both out-curve and
in-curve are detected)
Provided as standard Not provided
Curl blower Provided as standard Not provided
Table lifting device Provided as standard Not provided
Stacker Optional Optional
1500
1820
1200
400
750
805
350
1000
610
270
Main body
Auxiliary
table
Double stacker
Single stacker
Cloth receiving board
To Next Page
Loading...
