JUKI DLN-9010 - Page 207

DU-140, 141NH, 141H-7 (September, 2003) 2/2
39.2
9.8
31.3
D
12.4
D
38.4
9.8
31
40
D
EXCHANGEABLE GAUGE PARTS
● For DU-140, DU-141NH, DU-141H-7, DU-580
● For DU-140, DU-141NH, DU-141H-7
Description Throat plate Feed dog Notes
Description Walking foot Presser foot Notes
Standard
Single-lined feed dog
for sewing gloves and shoes
D1109-560-E00 (D=2.6)
D1109-560-E0A (D=4.2)
D1109-560-E0B (D=3.0)
B1109-201-H0B (D=3.5)
B1109-555-H0B (D=2.6)
B1105-141-000 (D=2.0)
B1105-141-H00 (D=2.6)
114-05800
D1613-560-E00
B1609-201-000A
B1609-201-000B
B1613-141-H00A
114-05701
Stitch length: max. 8mm
Stitch length: max. 8mm
Stitch length: max. 10mm
Stitch length: max. 9mm
Exclusive parts
Roller presser foot asm for DDL:
B1524-560-RB0
Narrow type walking foot for DU:
B1526-141-HAB
B1526-141-H0T
Standard
For piping
Cut-out tail for piping
Double groove
Left-hand
Right-hand
Narrow type for sewing
gloves and shoes
For attaching zippers
B1526-141-H0A□




B1527-141-H0□




B1528-141-H0□




B1529-141-H0□




B1526-141-H0Q
B1526-141-H0R
B1526-141-H0T
B1527-141-H0X
B1525-141-HA0
B1527-141-HA0
B1526-141-HAW
B1526-141-HAU
B1526-141-HAS
B1526-141-HAB
B1526-141-H0X
Piping size
B: 3.2mm (1/8") F : 6.4mm (1/4")
C: 4.0mm (5/32") H: 7.9mm (5/16")
D: 4.8mm (3/16") K: 9.5mm (3/8")
E: 5.6mm (7/32")
Piping size
B: 3.2mm (1/8") F : 6.4mm (1/4")
C: 4.0mm (5/32") H: 7.9mm (5/16")
D: 4.8mm (3/16") K: 9.5mm (3/8")
E: 5.6mm (7/32")
Stitch length: max. 6mm
Exclusive parts
Feed dog: 114-05701
Throat plate: 114-05800
Without hardening (blank)
www.egemakine.com.tr