PLC-1660, 1660L, 1665, 1660-7 (September, 2003) 3/3
WHEN YOU PLACE ORDERS
Specification
Standard
Thick-thread long-pitch
Code
S
L
Presser foot
Standard
Code
S
Presser foot
Standard
Provide with center guide
(needle gauge: 8mm)
Code
S
A
Presser foot
Standard
Provide with center guide
(needle gauge: 8mm)
Code
S
A
Feed dog
Round hole(φ2.4)
Slot (2.4mm×3.8mm) for S type (standard)
Slot (3.5mm×4.5mm) for L type (standard)
Code
A
B
C
Feed dog
Round hole(φ2.4)
Slot (2.4mm×3.8mm) Standard
Slot (3.5mm×4.5mm)
Code
A
B
C
Feed dog
Round hole(φ2.4)
Code
A
Needle gauge
8mm
10mm
Code
C
D
Needle gauge
8mm
10mm
Code
C
D
Needle gauge
6mm
8mm
10mm
Code
B
C
D
Throat plate
Standard
For under-tape attachment
(needle gauge: 8mm, tape width: 12mm)
For under-tape attachment
(needle gauge: 10mm, tape width: 14mm)
Code
S
C
D
Pneumatic auto-lifter
Knee switch type (AK116A)
Pedal switch type (AK116B)
Code
A
B
PLC1665 S
PLC1660
＊For thick-thread long-pitch type
L, the needle gauge code is "D"
and the presser foot code is "S"
only.
＊If the throat plate for under-tape attachment is selected,
specify needle gauge C for the C-type throat plate and
needle gauge D for the D-type.
Throat plate
Standard
For under-tape attachment
(needle gauge: 8mm, tape width: 12mm)
For under-tape attachment
(needle gauge: 10mm, tape width: 14mm)
Code
S
C
D
＊If the throat plate for under-tape attachment is selected,
specify needle gauge C for the C-type throat plate and
needle gauge D for the D-type.
Throat plate
Standard
For under-tape attachment
(needle gauge: 8mm, tape width: 12mm)
For under-tape attachment
(needle gauge: 10mm, tape width: 14mm)
Code
S
C
D
＊If the throat plate for under-tape attachment is selected,
specify needle gauge C for the C-type throat plate and
needle gauge D for the D-type.
＊If pedal-switch type B is specified use
servomotor or electronic-stop motor
(DC 24 V is required).
Pneumatic auto-lifter
Knee switch type (AK116A)
Pedal switch type (AK116B)
Code
A
B
＊If pedal-switch type B is specified use
servomotor or electronic-stop motor
(DC 24 V is required).
Pneumatic auto-lifter
Knee switch type (AK116A)
Pedal switch type (AK116B)
Code
A
B
● PSC box/operation panel for SC ● Motor for SC
SC380
PSC box
220〜240V
200〜220V
110〜120V
220〜240V
220〜240V
Single-phase
3-phase
Single-phase
3-phase
Single-phase
Operation panel
Not provided
Operation panel display language: English.
Instruction manual comes in three
different languages.
Operation panel display language: English.
Instruction manual comes in five different
languages.
Code
07
11
37
38
34
Motor
200〜240V
100〜120V
200〜240V
200〜240V
Single-phase
3-phase
Single-phase
3-phase
Single-phase
Code
60
61
62
63
Code
00000
E500B
E500C
＊JUS: North America and Central and South America.
M
PLC1660 A70B
For General
Export
For JUS (LA)
For CE
＊
For General
Export
For JUS (LA)
For CE
＊
To Next Page
Loading...
