JUKI IP-100 - Adjusting the Stroke of the Thread Draw-Out Wire (for the Machine with Thread Trimmer Only); Installing the Wiper Base (WB Type Only)

− 46 −
(34) Adjusting the stroke of the thread draw-out wire
(For the machine with thread trimmer only)
Standard Adjustment
(35) Installing the wiper base (WB type only)
Standard Adjustment
1
™ As observed from the operator, wiper 2 should be leveled.
Leveled
2
1
Not to come in contact
with each other
Not to come in contact
with each other
6
43
5
6
2
3
4