11
Button and display Description
I X ACTUAL SIZE VALUE display Actual size value in X direction of sewing shape being selected at
present is displayed.
When the actual size value input is selected by setting memory
switch
, X actual size value setting button is displayed.
→
Refer to
6. PERFORMING ITEM DATA CHANGE, p.21.
J X SCALE RATE SETTING button Scale rate in X direction of sewing shape being selected at present is
displayed on this button.
When the scale input is set to non-selection by setting memory switch
, the button goes out and the X scale is displayed.
→
Refer to
6. PERFORMING ITEM DATA CHANGE, p.21.
K Y ACTUAL SIZE VALUE display Actual size value in Y direction of sewing shape being selected at
present is displayed.
When the actual size value input is selected by setting memory
switch
, Y actual size value setting button is displayed.
→
Refer to
6. PERFORMING ITEM DATA CHANGE, p.21.
L Y SCALE RATE SETTING button Scale rate in Y direction of sewing shape being selected at present is
displayed on this button. When the scale input is set to non-selection
by setting memory switch
, the button goes out and the Y
scale is displayed.
→
Refer to
6. PERFORMING ITEM DATA CHANGE, p.21.
M MAX. SPEED LIMITATION Maximum speed limitation which is set at present is displayed on this
button and when the button is pressed, the item data change screen
is displayed.
→ Refer to
6. PERFORMING ITEM DATA CHANGE, p.21.
N FOLDER No. display Pattern register button which is displayed indicates the folder No.
which has been stored
O FOLDER SELECTION button Folders to display the patterns are displayed in order.
P PATTERN REGISTER button PATTERN REGISTER buttons stored in N FOLDER No. display are
displayed.
→
Refer to
14. PERFORMING NEW REGISTER OF PATTERN
BUTTON. p.40.
To Next Page
Loading...
