62
(3) Copy and deletion of the continuous stitching
Press in the continuous stitching setting screen, and the copy and deletion of continuous stitching pop-up
screen is displayed. The copy and deletion of the continuous stitching pattern can be performed.
○ How to copy
■Copy and deletion of continuous stitching pop-up screen
1) Press 1 in the copy
and deletion of continuous
stitching pop-up screen.
2) The copy pop-up screen is
displayed.
3 : Select the continuous
stitching pattern of the
copy source with “+”
and “–”.
4 : Select the continuous
stitching pattern of the
copy destination with
“+” and "–".
When
is pressed here,
the screen returns to the
former one without
performing copy.
3) When is pressed, copy
is performed.
The No. which is selected
to the copy destination is in
the selective state after
copy has been performed.
■Copy pop-up screen
3 4
3 4
1
2
○ How to delete
■Deletion pop-up screen
1) Press 2 in the copy and deletion of continuous stitching pop-up screen.
2) The deletion pop-up screen is displayed.
5 : Select the continuous stitching pattern to be deleted with “+” and “–”.
When is pressed here, the screen returns to the former one without performing deletion.
3) When is pressed, deletion is performed.
5
5
Once the data is deleted, it does not return to the former one. Be sure to press after
carefully checking the data.
When the number of registered pieces is one, deletion cannot be performed. When you
desire to delete it, perform deletion after creating another No.
The continuous stitching used in cycle stitching cannot be deleted.
Cau tion
Reference
To Next Page
Loading...
