LBH-1700 (June, 2001) 2/2
WHEN YOU PLACE ORDERS
● Machine head
LBH-1700S
● Control box
MC-600
Code
A
＊
B
C
Work clamp lifter
Standard (2-pedal unit)
Auto-lifter (magnet-driven type)
Auto-lifter (air-driven type)
Code
S
Application
Standard
Size/Part No.
Knife size: 6.4〜19.1mm
Knife size: 6.4〜25.4mm
Knife size: 6.4〜31.8mm
Part No.: B2702-047-K00
Part No.: B2702-047-L00
Part No.: B2702-047-M00
Part No.: B2702-047-Q00
Part No.: B2702-047-S00
Accessory
Factory installed on machine head
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc )
Supplied as an accessory (1 pc.)
Factory installed on machine head
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc.)
Part name
Work clamp 1
Work clamp 2
Work clamp 3
Knife 9.5mm (3/8")
Knife 12.7mm (1/2")
Knife 15.9mm (5/8")
Knife 25.4mm (1")
Knife 31.8mm (1-1/4")
＊The auto-lifter cannot be retrofitted to the machine.
Code
K
D
L
M
Power supply
Single-phase
3-phase
For CE Single-/3-phase 220V 〜 415V
(Not provided with a power switch)
220
〜
240V
220
〜
240V
220
〜
415V
＊Accessories for the work clamp and knife
Function
Invokes patterns stored in memory.
Moves the needle bar to the far right position of its stroke when threading the needle.
UP counter →To be used as the counter for the No. of pcs.
DOWN counter →To be used as the bobbin thread counter.
Establishes thread tension for sewing parallel sections and bartacking sections of buttonholes.
Establishes data on detailed parts of the stitching shape such as the overedging width,
parallel-section stitch pitch, lateral position correction of the bartacking groove, lateral
position correction of the knife groove width, clearance, and material-cutting width.
Selects one of seven stitching shapes.
Square*, radial and square*, half-moon (round)*, radial, half-moon and radial, radial with
taper bar, radial with straight bartacking(* Three of the seven stitching shapes can be
selected on the operation panel by a simple, one-touch operation.)
Changes over between single stitching and double stitching.
Enables and disables the knife operation.
Selects the work clamp size.
Moves the feed forward/backward stitch by stitch.
Changes the sewing speed with the slide speed controller.
Item
Pattern No.
Needle threading
Counter
Thread tension
Programming of data on
detailed stitching shape
Selection of stitching
shape
Selection between
single/double stitching
Performance of the cloth
cutting knife
Work clamp selection
Forward/backward travel
of feed
Change of sewing speed
● List of major functions of the operation panel
● The machine is provided as standard with seven different stitching shapes.
Model
Q060
Q061
―
―
―
―
Part No.
MAQ-06000-0A0
MAQ-06100-0A0
B9402-771-000
B9402-771-00A
B9401-761-000
G5001-198-0A0-A
M8524-600-0A0
B3221-771-0A0
SK-3452000-SC×4
M8525-600-0B0
GPK-51001-0A0
M9013-590-0A0
Description
For men's shirts
For ladies' blouses
For lateral buttonholes on the right
front of the garment bodies
For lateral buttonholes on the left
front of the garment bodies
For vertical buttonholes
Electric bobbin winder (asm.)
Power cord (asm.)
Tension controller (asm.)
Wood screws
Thread tension control knob (asm.)
2-pedal unit for standing work (asm.)
Junction cable (asm.)
Features
First buttonhole spacing guide
A ruler used to place the first buttonhole at a predetermined location on a
men's shirt or ladies' blouse based on the shape of the collar.
Buttonhole interval gauge
A ruler used to place the next buttonhole at a predetermined interval relative
to the previously finished buttonhole.
Can be mounted on the table for the operator’s convenience.
The thread tension control knob is used to finely adjust the designated thread tension.
Pedal unit for standing work
OPTIONS
Square＊ RadialRadial and square＊
Half-moon (round)＊
Square and half-moon
(round)
Radial, with taper bar
Radial, with straight
bartacking
＊The buttonhole shapes marked with an asterisk (*) can be selected through the operation panel.
Operation panel
To Next Page
Loading...
