AMS-210D, 210D P TYPE (June, 2001) 1/3
AMS-210D
AMS-210D (P type)
WHEN YOU PLACE ORDERS
● With its newly designed thread take-up and shuttle hook, the machine
reduces irregular stitches and provides consistent thread tension.
● The feeding frame and the intermediate presser have been improved to
provide a higher pressure on the material. By securely clamping the
material, they ensure consistent-quality seams free from uneven
material feed.
● The sewing capability has been improved further, especially sewing
heavy-weight materials with thick thread.
● High-speed performance of 2500rpm (when stitch length is set to 3mm)
● The lift of the feeding frame is now as high as 30mm (for pneumatic
feeding frame), and the lift of the intermediate presser has also been
extended to 20mm.
With these increased lifts, the material to be sewn can be easily placed
on the machine.
● The machine incorporates a direct-drive mechanism that connects a
compact AC servomotor directly to the main shaft. This transmits
motor revolutions to the main shaft with no loss, thereby improves the
machine's responsiveness.
AMS-210D
〈Sewing area: 60mm(L)×130mm(W)〉
● As a result of JUKI's thorough study of sewing performance, the area in
which hitch stitches appears is reduced to one-third or less of the area
produced with conventional cycle machines. Consequently, the
sewing area finished with perfect stitches is enlarged, and the seam
quality of top stitches is further upgraded.
● Since the feeding direction of the hitch stitching area is restricted to a
range of 5˚to 55˚, each of the four different feeding directions
(0˚, 90˚, 180˚and 270˚) used to sew the four sides of a rectangular
label can be finished with perfect stitching.
AMS-210D P TYPE
〈Sewing area: 60mm(L)×130mm(W)
〉
AMS-210D Z
● Machine head
Code
S
H
Application
Standard
For heavy-weight materials
Code
5000
6001〜
Subclass
Standard
Subclass
Code
S
P
Stitch type
Standard
Perfect stitch
Code
S
L
Feeding frame type
Magnet-driven feeding frame
Pneumatic separately-driven
feeding frame
J-AM2000 B
● Table stand
Code
B
Control panel
English and pictograph
Code
A
B
C
D
Pedal switch
2-pedal unit
3-pedal unit
PK 2-pedal unit
PK 3-pedal unit
Code
C
K
R
D
L
M
Power supply
100〜120V
Single-phase 200〜240V
220〜415V
200〜240V
3-phase
220〜415V
220〜415V
(For CE)
Code
S
L
Specification
Magnet-driven feeding frame
Pneumatic separately-driven
feeding frame
＊For using magnet-driven feeding frame type,
please select A or C type. (Standard: C type)
＊For using Pneumatic separately-driven feeding
frame type, please select B or D type.
Computer-controlled Cycle Machine with an Input Function
Computer-controlled Cycle Machine with an Input Function
for Wider-area Perfect Stitching
To Next Page
Loading...
