JUKI MF-7000 Series - Page 193

AMB-187N, 189N, 187NR, 189NR (June, 2001) 2/4
Model name
Machine head
Max. sewing speed
Needle bar stroke
Needle (at the time of delivery)
Thread
Type of sewing
Outside diameter of button
Number of stitches
Number of neck wraps
Button neck height
Number of stay stitches
Stay stitch feeding amount
Lubrication
Lubricating oil
Power requirement
Power consumption
Compressed air and air consumption
Dimensions
Adjustment of the height of table
Total weight
WHEN YOU PLACE ORDERS
Pedal switch
Knee switch
2-pedal (PK62)
100〜130V
115V (for North America)
190〜250V
190〜250V
220V (for North America)
380V (for JE)
380V (for General Export)
415V
440V
SPECIFICATIONS
AMB-187N AMB-189N
MB-376 (exclusive head)
850rpm
58.6mm
Button with neck wraps: SM×332EXTLG (Nm90) Nm80, Nm100
Button without neck wraps: SM×332EXTLG (#14BUT) #16, #18
Cotton thread, supn thread: #60〜#30, B33〜B46, 120/3〜60/3
Four-holed and two-holed flat button sewing with/without neck wraps
Parallel stitching or cross stitching for four- holed flat buttons
― Shank and marble button sewing with neck wrap
 φ8〜16mm: Button chuck, small
φ8〜32mm φ14〜25mm: Button chuck, medium
 φ21〜32mm:Button chuck, large
2〜30 (can be set in 2-stitch steps) 2〜32 (can be set in 2-stitch steps)
2〜44 (can be set in 2-stitch steps) 2〜46 (can be set in 2-stitch steps)
For four-holed and two-holed flat button sewing with neck wraps: 1.5〜6mm
(0mm for sewing buttons without neck wraps)
―
Shank and marble button sewing with neck wraps
0〜3mm
One to be selected one from among 0, 1, and 2
0〜3mm (to be set in increments of 0.2mm)
By an oiler
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Single-phase 100V, 110V, 120V, 200V, 220V, 240V
3-phase 200V, 220V, 240V, 380V, 415V, 440V
450W
0.5MPa (5.0kgf/cm
2
), 15N /min
1,100mm (W)×810mm (L)×1,500mm (H)
Height of the top face of the table 750〜1,030mm
120kg
Power supply Code
Q
C
U
W
K
L
Y
M
N
Code
A
B
Option
Not provided
Button loader
Code
RSingle-phase
3-phase
AMB-
187N
189N