JUKI MF-7000 Series - Page 216

DNU-241H, 241HS, 241H-7 (June, 2001) 3/4
22
0.2
22
6.2
22
6.2
6.2
4.5
D
4.5
2.3
10
6
4.1
4.1
5.7
3.8
7
● For DNU-241H(S), DNU-241H-7, DNU-261H
EXCHANGEABLE GAUGE PARTS
● For DNU-241H(S), DNU-241H-7
Description Throat plate Feed dog Notes
Description Presser foot Walking foot Notes
Standard
(without groove)
For thin needles
With groove
Standard
Left-hand type
B1105-241-H00A D1613-241-E00
D1613-241-E0A
D1613-241-E0B
Needle hole: 4×2.5mm
Needle hole: 2.6×2.2mm
Needle hole: 4×2.5mm
B1525-241-HA0
B1525-053-0A0
B1525-562-BA0
B1525-563-E00
B1524-245-0A0
B1529-245-0AD
(special order)
B1529-245-0AC
(special order)
B1529-245-0AB
(special order)
B1470-241-HA0
B1470-053-000 (D=2.8)
B1470-053-C00 (D=2.3)
B1470-562-B00
B1470-563-E00
B1470-245-000
B1476-245-00D
(special order)
B1476-245-00C
(special order)
B1476-245-00B
(special order)
For DNU
Stitch length: max. 10mm
For LU & LS
Stitch length: max. 10mm
Stitch length: max. 10mm
With teeth
Stitch length: max. 10mm
DSC-245(-7), 246(-7) standard
Stitch length: max. 6mm
Stitch length: max. 8mm
With teeth
Stitch length: max. 6mm
With teeth
Stitch length: max. 8mm
With teeth
14