LU-1508, 1508H, 1510, 1510-7 (June, 2001) 1/4
LU-1510-7-0BB/XC-E500
LU-1508
LU-1508H
(for extra heavy-weight materials)
LU-1510
(with an automatic lubricating mechanism)
LU-1510-7
1-needle, Unison-feed, Lockstitch Machine with a Vertical-axis Large Hook
(with an automatic lubricating mechanism
and an automatic thread trimmer)
WHEN YOU PLACE ORDERS
SC-380- -
● Without an automatic thread trimmer
LU-1508 LU-1510
Application
Standard
For extra heavy-weight
materials
Code
H
● With an automatic thread trimmer
LU-1510-7-0B
Pneumatic auto-lifter
Knee switch type (AK119A)
Pedal switch type (AK119B)
Not provided
Code
A
B
● PSC box/control panel for SC
● Motor for SC
● The new mechanism with a rectangular feeding motion
promises consistent feed of materials of all thickness without
stitch gathering.
The lower orbit of the feed dog prevents the material from
flopping and reduces operating noise and vibration.
〈Rectangular feed〉LU-1508, LU-1510, LU-1510-7
Compared with the elliptical feed, the rectangular feed helps
reduces gathered stitches.
〈Complete rectangular feed〉LU-1508H
The locus of the "needle" and "feed" motions are nearly
rectangular. This prevents stitch gathering and provides
efficient feed on multi-layered portions of material.
● With the adoption of a new rectangular feed mechanism, an
alternating vertical movement mechanism, and a unison-
feed mechanism, the machine can feed heavy-weight
materials powerfully and smoothly. Well tensed seams are
consistently produced without pitch errors.
● Even when a heavy-weight material is used, the presser foot
lift does not decrease. This means that the presser foot
comes into contact with the material at exactly the same
time that it does when sewing lighter-weight sections of the
material. As a result, the walking foot retains the material
with a consistent pressure to prevent irregular stitches.
● LU-1508H
• The maximum stitch length is 10mm. The complete
rectangular feed locus enables accurate feed of extra heavy-
weight materials while preventing stitch gathering.
• With its sufficient needle bar stroke of 38mm and long 190R
needle, the machine supports the sewing of extra heavy-
weight materials.
• The machine comes with an extra large steel handwheel with
a diameter as large as φ175.
● LU-1510, LU-1510-7
• The machine is equipped with a bottom-feed adjusting
mechanism that adjusts the amount of bottom-feed while
keeping the needle-feed fixed. With the mechanism, the
machine can prevent uneven material feed without changing
stitch pitches.
• Automatic lubricating mechanism improves maintainability.
The machine is provided with a sub oil pan and double filter
to keep dust from entering the oil.
● LU-1510-7
• The machine comes with JUKI's proven thread trimming
mechanism. With its robust knife and cam configuration,
the thread trimmer reliably cuts threads as thick as #5.
• The vertical strokes of presser foot and walking foot (their
alternating vertical movement) can be easily changed using a
large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with
the set value. With this feature, ideal sewing conditions are
maintained at all times.
M
Code
60
61
62
63
Motor
For General
Export
For JUS (LA)
For CE
Single-phase
3-phase
Single-phase
3-phase
Single-phase
200〜240V
100〜120V
200〜240V
200〜240V
Code
07
11
37
38
34
Code
00000
E500B
E500C
PSC box
For General Export
For JUS (LA)
＊
For CE
Control panel
Not provided
Control panel display language: English.
Instruction manual comes in three different languages.
Control panel display language: English.
Instruction manual comes in five different languages.
Single-phase
3-phase
Single-phase
3-phase
Single-phase
220〜240V
200〜220V
110〜120V
220〜240V
220〜240V
＊
＊JUS: North America and Central and South America.
To Next Page
Loading...
