To Next PageTo Next Page
Need help?Do you have a question about the JUKI MO-6914S and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Threads | 4 |
| Needle | DB x 1 |
| Lubrication | Automatic |
| Stitch Type | Overlock |
| Differential Feed | Yes |
| Stitch Length | 1-4 mm |
| Max. Sewing Speed | 7000 SPM |
| Maximum Sewing Speed | 7000 SPM |
| Differential Feed Ratio | 0.7-2.0 |
Describes the three categories of danger levels: Danger, Warning, and Caution.
Explains pictorial warnings and warning labels for safe operation.
Prohibits using the machine for unintended purposes or modifying it.
Specifies situations requiring power to be shut off for safety.
Guidelines for installing tables, stands, cables, grounding, and motors.
Ensuring connectors and cables are safe before turning on power.
Safety measures to prevent injury from moving parts during operation.
Safety measures for repair, adjustment, and cleaning, emphasizing qualified personnel and genuine parts.
Critical warnings regarding electrical shock hazards.
Warnings about operating with safety devices removed, motor pulley covers, and grounding.
Reading manuals, using safety goggles, and consulting specialists for pacemakers.
Ensuring safety devices are installed and warning labels are visible.
Situations requiring the machine's power to be turned off.
Precautions for installing tables, wiring, grounding, and motors.
Critical safety steps before and during machine operation.
Further warnings about keeping hands away from moving parts and stopping the machine.
Safety measures for repair, adjustment, and cleaning, emphasizing qualified personnel and genuine parts.
Safety for fuse replacement, motor fan cleaning, and general maintenance.
Avoiding electric shock by not opening covers or touching parts with power on.
Preventing injury from moving parts, including guards and proper motor use.
Confirming machine cleanliness, dust removal, lubrication, and correct voltage settings.
Steps for adding JUKI Machine Oil 18 to the oil reservoir and checking the level.
Ensuring the machine rotates clockwise to prevent seizure.
Guide for threading the needle thread through the take-up lever.
Guide for threading the needle thread for overlocking.
Steps for adjusting presser foot pressure using nuts and screws.
How to loosen the lock nut, move the lever, and use the fine adjustment screw.
Explanation of differential feed ratios for stretching and gathering stitches.
How to adjust the lower and upper knives and the overedge width.
Value for adjusting the looper thread cam.
