JUKI SC-510 - Operation Panel Details

– 12 –
[PLC]
1) Install panel thread guide 9 to the installing plate
with screw 2, spring washer 3 and washer 4.
2) Install the operation box to installing plate !2
using screws !0 and washers !1 supplied as
accessories.
3) Remove screws !3 attached to the sewing
machine.
4) Install installing plate !2 to the sewing machine
using screws 5, washers 6 and toothed lock
washers 7 supplied as accessories of the panel.
PLC
! !3 Installing position
!
CP-160
笊
笆
笳
笘
!0
!1
5
6
7
!2