– 73 –
Silk changed
Different from other models
No change
Not used
10. CONNECTOR CONNECTION DIAGRAM
(1) SC Series Connector Allotment Table
Rev. 01 Rev. 02 and thereafter
(Caution) 1. For the SC-910N, the connector number (CN**) may change according to the version.
2. Check the functional revision of the board and then insert it in the corresponding connector.
3. The descriptions in the next page and thereafter are applicable to the connector numbers of
Rev. 02 and thereafter.
CN_No. SC-910N SC-910N (silk) Remarks
CN30 Synchronizer Motor_Encoder Motor _Encorder
CN31 Head_Type_Selector PWR-CTL_I/F PWR-CTL connecting connector
CN32 PK_Pedal Head_Type_Selector Head_Type_Selector
CN33 Not used Synchronizer Head_Synchronizer
CN34 IP-110 I/F ← IP-110
CN35 CP-170 I/F DC_POWER_Supply
DC_POWER_Supply Connector (+33V, +24V)
CN36 Pedal_Sensor Head_Solenoide Head_Solenoide
CN37 Not used AK_Solenoide AK_Solenoide
CN38 Not used CP-170 I/F CP-170
CN39 Motor_Encoder PK_Pedal Standing-work pedal
CN40 AK_Solenoide Not used
CN41 DC_POWER_Supply Not used
CN42 User_Option (13p) Not used
CN43 +24V (Option) Not used
CN44 PWR-CTL_I/F Not used
CN45 ED ← Material end sensor
CN46 Head_Solenoide Pedal_Sensor Pedal sensor (CN34 except 910)
CN47 Option_Board ← Option_Board
CN48 ←←Safety SW
CN49 PLD_Rewrite ← PLD_Rewrite
CN50 Cpu_Rewrite User_Option (13p) External I/O
CN51 PANEL I/F PANEL I/F Display panel
CN52 Not used Cpu_Rewrite Cpu_Rewrite
CN53 Not used Not used
CN54 Not used Not used
CN55 Not used +24V (Option) LED/FAN power supply
CN56
CN57
CN58
CN59
CN60
To Next Page
Loading...
