– 16 –
Overlapped stitching pattern
Press to display the pattern list screen.
1. Press switch to select the overlapped stitching pattern, and the screen is automatically changed over to the
number of stitches of overlapped stitching setting screen to display the number of stitches which has already
been set.
2. When changing the number of stitches, change it with switches
and for setting the number of stitches for
processes A through C. To change the number of times of the whole processes, change it with switches and
for setting the number of processes D.
(The range of the number of stitches A, B and C that can be changed : 0 to 19 stitches, The range of the number
of processes D that can be changed : 0 to 9 times)
3. Depress the front part of the pedal once, and the sewing machine will repeat the normal stitching and reverse
stitching as many as the number of specified times. Then the sewing machine will automatically make the thread
trimmer actuate and will stop to complete the overlapped stitching procedure. (The one-shot automatic stitching
cannot be turned OFF.)
4. When thread trimming prohibiting function
is selected, the machine will stop with the needle up upon comple-
tion of the overlapped stitching procedure without performing thread trimming.
To Next Page
Loading...
