– 32 –
(3) Explanation of the operation panel (CP-18)
switch : Used for changing over effective/ineffective of the reverse feed stitching pattern.
switch : Used for changing over effective/ineffective of the overlapped stitching pattern.
switch : Used for confirming the contents of setting and for changing over effective/ineffective of
the reverse feed stitching at sewing start.
switch : Used for selecting the process (A, B, C, D) the number of stitches for which is to be
changed.
* The selected process flashes on and off.
switch : Used for changing the content of the selected display (flashing section) and for changing
over effective/ineffective of the reverse stitch at sewing end.
switch : Used for changing the content of the selected display (flashing section).
switch : Used for calling the production support function (by keeping the switch held pressed for
two seconds).
Indicators
and
: Various pieces of information are displayed.
LED
: Lights up when the reverse feed stitching pattern is effective.
LED
: Lights up when the overlapped stitching pattern is effective.
LED
: Lights up when the production support function is displayed.
To Next Page
Loading...
