– 33 –
(4) Operating procedure of the sewing pattern
Without reverse
stitching
Reverse
stitching
Double reverse
stitching
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation
panel to be used.
1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
[Setting procedure of the reverse feed stitching]
1. Effective/ineffective of the re-
verse feed stitching pattern can be
changed over by pressing
switch
.
When the reverse feed stitching pat-
tern is rendered effective, LED
lights up, the number of stitches of
the reverse feed stitching at sew-
ing start is displayed on
, and the
number of stitches of the reverse
feed stitching at sewing end is dis-
played on indicator
.
2. When the number of reverse feed
stitches display is not flashing on
and off, every press on switch
changes over the reverse feed
stitching mode from the "reverse
feed stitching at sewing start," "dou-
ble reverse feed stitching at sewing
start" and "no reverse feed stitching
at sewing start."
In addition, every time switch
is pressed, the reverse feed stitching
feature changes over from the re-
verse feed stitching at sewing end to
the double reverse stitch at sewing
end, then to no reverse feed stitch-
ing at sewing end, in turn.
(Caution) For some types of the machine
head, reverse feed stitching
patterns are not available.
Select a process (A, B, C or D) the number of stitches for which is to be changed by using switch
.
The number which is flashing on and off represents the process which is being set.
Change the number of stitches for the selected process by using switch
and switch
.
Press switch
to confirm the
change you have made. (The number of stitches that can be set is 0
to 15.)
(Caution) The sewing machine cannot perform sewing when the display of the number of stitches for
a process is flashing on and off.
To Next Page
Loading...
