– 13 –
14. Hand lifter lever
Disassembly
™ Enter 3 to 4 screw threads of M4
screw (arm cover setscrew) in the
hole of hand lifter lever shaft on
frame.
™ Hold screw head and draw out the
screw. At the same time, 2 hand
lifter lever shaft is drawn out.
™ Remove 1 hand lifter lever.
Assembly
™ Enter 2 hand lifter lever shaft into
the hole on frame.
™ Tap head of lever shaft to fit the
shaft by force and set the shaft to
hole in hand lifter lever.
Point
™ End face of lever shaft that is fit
by force should not be convex
from frame face.
1 Hand lifter lever
2 Hand lifter lever shaft
3 M4 screw
Disassembly
™ Loosen presser foot lift lever shaft
stopper screw 4.
™ Enter 3 to 4 screw threads of M4
screw (arm cover setscrew) in the
hole of hand lifter lever shaft on
frame.
™ Hold screw head and pull it and
remove.
™ Pull up presser foot lift lever axle
at a time.
™ Remove 1 hand lifter lever.
Assembly
™ Enter 2 hand lifter lever shaft into
the hole on frame.
™ Ajust presser foot lever shaft set
screw 4 so that the tip of screw
4 may hit at flat spot of presser
foot lever shuft 2.
Point
™ End face of presser foot lever
shaft a is not to project from
frame side.
1 Hand lifter lever
2 Hand lifter lever shaft
3 M4 screw
4 Presser foot lift lever shaft
stopper screw
TL-98Q
TL-98QE
Flat spot
a
To Next Page
Loading...
