To Next PageTo Next Page
Need help?Do you have a question about the Julabo Presto Plus LH 47 and is the answer not in the manual?
General| Brand | Julabo |
|---|---|
| Model | Presto Plus LH 47 |
| Category | Control Systems |
| Language | English |
Details the key functional elements and features of the temperature control systems.
Provides guidelines for the proper disposal of the unit and its components.
Lists detailed technical data, performance parameters, and specifications of the models.
Explains requirements and procedures for connecting cooling water to the LH50 model.
Clarifies the meaning of warning symbols and designations used in the manual.
Presents critical safety instructions for installation, operation, and general handling of the unit.
Illustrates the operational principle of the system with a closed external loop.
Discusses selection and handling of appropriate bath liquids, including safety precautions.
Recommends suitable tubing and highlights safety considerations for high-temperature applications.
Provides step-by-step instructions for the proper installation of the unit.
Guides on connecting the unit to external systems for temperature control applications.
Details connecting cooling water to LH50, emphasizing water quality.
Explains the correct procedure for connecting the unit to the power supply.
Describes the process of filling the internal reservoir and heat exchanger with bath liquid.
Explains the automatic degasifying process that occurs during heating and its importance.
Details the procedure for safely draining bath fluid from the unit and external system.
Covers initial power-up and setting the user interface language.
Explains how to start and stop the operation of the temperature system.
Describes adjusting the target working temperature using the keypad.
Details accessing and modifying settings like temperature, limits, and pump stage.
Covers configuring excess temperature protection (TANK and RES) for safe operation.
Allows optimization via configuration settings and identification processes.
Details manual PID parameter adjustment for optimal performance.
Guides initiating stored temperature profiles manually or via timer.
Covers creating, editing, and managing temperature profiles.
Describes configuring analog signals for external programmers and outputs for recorders.
Explains setting temperature limits for internal and external control to protect equipment.
Details configuration of communication interfaces like RS232/RS485 for remote control.
Describes Absolute Temperature Calibration (ATC) for internal and external sensors.
Explains controlling the circulation pump and setting operating modes.
Lists common error codes, their meanings, and recommended solutions or actions.
Guides on configuring instrument and interface parameters for remote operation.
Explains establishing communication and sending commands to the unit via PC.
Provides a comprehensive list of commands for controlling and querying the instrument remotely.
Lists status messages and error codes reported during remote operation.
Instructions for cleaning condenser/filter to ensure optimal cooling.
