4 Operation
12
4.3 Connections
4.4 Stand-up hinge
Operation: ✱ Pull on the "open" lettering to fold out the stand-up hinge to a position of
90 ° (1). Pull on the "open" lettering again to fold out the stand-up hinge to
a position of 180 ° (2).
Functions: When the stand-up hinge is closed, the device can be laid flat on the table or
secured on a belt.
When the stand-up hinge is at a position of 90 °, the device can be set up on
an even surface.
When the stand-up hinge is at a position of 180 °, the device can be hung on
a hook, for example.
(1)
This socket does not have a function, please do not connect any devices
(2) Connecting cable of the securely connected conductivity measuring cell
(3) Socket for connecting a power supply unit
Stand-up hinge closed
Stand-up hinge positioned at 90°/180°
To Next Page
Loading...
