101
8 Operation
8.3.1 Alarm list
The alarm list displays the current alarms. Alarms are cleared upon elimination
of the alarm condition. Each alarm triggers a "collective alarm". The alarm list
view contains buttons for viewing details about alarms and acknowledging col-
lective and dosing alarms.
⇨ "Acknowledging collective/dosing alarms", page 103
Alarms are visualized further by the color of the bell icon on the "Alarm/event list"
button, in the "Alarm list" menu item of the "Alarm/event list" menu and in the title
bar of the operation screens. The symbols used for visual signaling of alarms
are listed in the following table.
Visualization of alarms in the title bar can be activated in the configuration. The
most recently occurring alarm then flashes red in the title bar of the operation
screens.
⇨ Chapter 10.3.1 "General information", page 135
If the alarm from a measurement input disappears, the color of the respective
measuring-value display changes in accordance with the color settings.
⇨ Chapter 10.3.3 "Colors", page 136
Meaning Symbol
at least 1 alarm present
Details can be viewed in the "Alarm list" and in the "Event list".
no alarms
Acknowledge
collective/dosing
alarm
Display entire description text for
highlighted entry
Back to
Operating level
Example:
Alarm list
To Next Page
Loading...
