135
10 Configuration
10.3 Display
10.3.1 General information
Open: Device Menu > Configuration > Display > General
Configuration point Selection/
setting option
Explanation
Lock touchscreen Selection from
binary selector
Digital signal that blocks operation of the touch-
screen (e.g. key switch for locking operation)
Simulation of
inputs
Yes
No
When this function is activated, alternating on/off
signals are simulated automatically at the binary
inputs and continuous value changes at the ana-
log inputs
This function is used for troubleshooting. Deacti-
vate it during normal operation.
Main screen Selection of an
operation screen from
the operation loop
Selection of the operation screen as main screen
The main screen appears after the device has
been switched on or the "Home" button has been
pressed.
Display 1 and 2 gen-
eral screen
Yes
No
Individual operation screens can be shown or
hidden in the operation loop here.
Show detailed screen
1to6
Show diagram
1 and 2
Show process screen
1to8
Show controller
overview
Show controller
1to4
Show alarms Yes
No
Activation or deactivation of alarm visualization in
the title bar of the operation screens
To Next Page
Loading...
