10 Configuration
144
10.5.3 Calibration timer
Open Calibration Timer Settings Universal Inputs:
Device Menu > Configuration > Analog Inputs >
Universal Input 1 to 3 > Calibration Timer
Calibration timers prompt the user to calibrate sensors on a regular basis. The
settings for all analysis inputs and the universal inputs are explained together.
⇨ Chapter 10.12 "Calibration timer", page 174
Compensation
pH value
Selection from
analog selection
Analog input of the pH-value sensor for pH-com-
pensated measurement of free chlorine
Alarms 1/2 Analog input alarms are used to monitor measured values
in relation to adjustable limit values.
The alarm settings for all analog device functions are explained together.
⇨ Chapter 10.11.2 "Alarms for analog signals and digital sensors", page
170
a
Resistance transmitter
b
The unit for the particular sensor value appears in the entry field.
Configuration point Selection/
setting option
Explanation
To Next Page
Loading...
