JUMO AQUIS touch P - Order Details

4 Identifying the device version
22
4.2 Order Details
NOTE!
In addition to the standard languages of German, English, and French, 13 ad-
ditional languages (e.g. Russian, Chinese, Italian etc.) are available. Please
use the contact information on the back of this manual to contact JUMO in this
regard.
Slot
(1) Basic type
202580 JUMO AQUIS touch P
(2) Version
8 Standard with default settings
9 Customer-specific configuration (specification in plain text)
(3) National language
01 German
02 English
03 French
(4) Analysis input 1 IN 7
0 Not used
1 pH/redox/NH
3
2 CR conductive conductivity measurement (2 and 4-pole)
3 Ci inductive conductivity measurement
(5) Analysis input 2 IN 8
0 Not used
1 pH/redox/NH
3
2 CR conductive conductivity measurement (2 and 4-pole)
3 Ci inductive conductivity measurement
(6) Input/output 1 IN 11, OUT 6/7
00 Not used
10 Universal input
11 Relay (changeover contact)
12 2× relays (normally open contact)
13 Solid state relay triac 230 V, 1 A
14 Logic output 0/22 V
15 2× logic outputs 0/12 V
16 analog output
17 2× solid state relay PhotoMOS®
a