309
22 PC Setup Program
22.7.4 Searching for a device in the network
This function assists the user with selecting the IP address or the host name for
the device of interest. A "Search" button is located
to the right of the entry field in the dialog for entering the IP address or host
name.
Clicking on this button automatically finds all potentially suitable devices in the
local network and displays them in a list.
The listed devices are located in the same subnet as the PC from which the
search was initiated. Specifying the software version in the "SW Base" field lim-
its search to specific devices and versions.
If devices in a different subnet are to be searched, the address range of the de-
vice must be known. This address range must be entered into the field "IP-Adr.".
The first 3 bytes of the IP-address must be known, only the last byte can be en-
tered as the range (e.g. 10.13.3.50-150).
The device concerned can be highlighted with the mouse pointer (by clicking on
the cell) and accepted by pressing OK
(or by double-clicking on the cell). This
To Next Page
Loading...
