5 Mounting
30
5.3 Panel insertion
The device is designed to be inserted in switch cabinets or machine/system
walls. The insertion operation is described below.
NOTE!
Insertion in a control panel provides protection class IP66. When the JUMO
AQUIS touch P is inserted in the wall of control cabinets with a protection class
higher than IP66, the protection class of the control cabinet lapses and corre-
sponds to the protection class for control panel insertion (IP66).
CAUTION!
Ensure that the control panel provides adequate support for the device.
The weight values listed in the technical data must be taken into account to en-
sure adequate mechanical stability for control panel installation.
v Chapter 23.12 "Case", Page 378
To Next Page
Loading...
