325
22 PC Setup Program
22.8.7 Formula
Formula must be created with the JUMO PC setup program. During data trans-
fer to the device, the formula are then loaded into the JUMO AQUIS touch P to-
gether with the setup. For formula that have already been loaded into the device,
the configuration data below the formula entry field can also be set on the device
as an alternative.
Explanation of the configuration data for "Formula":
⇨ Chapter 10.20 "Formula", page 191
Open Settings:
Only Setup > Formula > Formula 1 to 16
To create formula, open the Formula Editor by pressing the button. With the aid
of the Formula Editor, you can select variables from the analog and binary se-
lectors as well as available operators to add them to the mathematical expres-
sion in the text window by pressing the corresponding "Add" button.
If necessary, the formula can also be edited by entering characters with the key-
board.
To Next Page
Loading...
