359
22 PC Setup Program
22.10.6 Adjusting / Testing
Numerous testing functions that are available in similar form in the device set-
tings menu at the "Functional level" or under "Device info" can be found under
"Adjusting / Testing". The contents and functions of the individual tabs in the
"Adjusting / Testing" window are described in the following.
Hardware / Software
This is used to query the version information for the device software and hard-
ware, e.g. which optional boards are installed.
Open:
Online Parameters > Adjusting / Testing (double-click) > Hardware / Software
tab
Calibration constants
Displays characteristic curve date (e. g calibration values for analysis inputs) for
each analog input and output.
Open:
Online Parameters > Adjusting / Testing (double-click) > Calibration Constants
tab
CAUTION!
When "Adjusting / Testing" is opened, the outputs assume undefined states.
For this reason, "Adjusting / Testing" may not be opened during operation of
equipment being controlled by the JUMO AQUIS touch P.
To Next Page
Loading...
