JUMO AQUIS touch P - Connecting Cables; Preparing Coaxial Cables for Ph;Redox Electrodes

35
6 Electrical connection
6.2 Connecting cables
6.2.1 Preparing coaxial cables for pH/redox electrodes
Coaxial cable with Shield-Kon
®
connector
1
Preparing your own coaxial cable
Remove outer sheathing from the cable > Pull back the braided shield
.
Remove black, semiconducting layer (see image) > Strip insulation off inside
conductor > Attach Shield-Kon® connector
1
for shield
Length Part no.
1.5 m 00085154
5 m 00307298
10 m 00082649
ø5mm
ø2mm
ø1.5mm
1.Shield-Kon is a registered trademark of THOMAS & BETTS INTERNATIONAL, Inc.,
Wilmington Del., US.
25 mm
Sensor
Inner conductor
Shield-Kon
® connector