JUMO AQUIS touch P - Analysis Input: CI (Conductivity, Inductive)

369
23 Technical data
23.2.4 Analysis input: Ci (conductivity, inductive)
Units µs/cm
ms/cm
Measuring/display ranges
a
a
The display range is scalable. The Comma format is freely configurable. In addition, an
automatic Comma format can be set.
0.0000 to 9.9999
00.000 to 99.999
000.00 to 999.99
0000.0 to 9999.9
00000 to 99999
Temperature compensation TC linear
b
TC curve
natural water
natural water with expanded temperature range
NaOH 0 to 12%
NaOH 25to50%
HNO
3
0to25%
HNO
3
36 to 82%
H
2
SO
4
0to28%
H
2
SO
4
36 to 85%
H
2
SO
4
92 to 99%
HCl 0 to 18%
HCl22to44%
b
TC: temperature coefficient
Cell constant 4.00 to 8.00 cm
-1
Measuring range selection
c
c
In the Configuration up to 4 different measuring ranges with separate display range limits,
units, temperature compensation methods
and alarm functions
can be configured. The respective currently active measuring range is selected
via binary signals.
4 configurable measuring ranges
Measuring accuracy for 0 to 999 µS/cm: 1.5% of the MRE
d
for 1 to 500 mS/cm: 1% of the MBE
d
for 500.1 to 2000 mS/cm: 1.5% of the MBE
d
d
MRE: Measuring range end value
Ambient temperature influence 0.1%/K